Description
Cilindro Half Series 8kW Stainless Steel Sauna Heater at 240V 1PH with Built-In Time and Temperature Controls
\n
\n
The Harvia Cilindro electric sauna heater contains a massive amount of stones. Thanks to the grate-like outer shell, each bather can adjust the nature of the steam: soft when throwing water onto the side of the heater and sharp when throwing water straight on top of the stone pillar. Cilindro is impressive to both look at and experience.
\n
Features
\n
- \n
- Side wall or corner of room install
- Stainless Steel housing
- Built-in controls
- Elements run down center of heater
- Stainless Steel elements
- 200 lbs stone capacity (requires 5 boxes sold separately)
- ETL certified
- For saunas 141-431 CU. FT
\n
\n
\n
\n
\n
\n
\n
\n
\n
Package Contents
\n
\n
- \n
- 8.0 kW Sauna Heater with built-in digital control
- Installation and operation manual
- 2-year warranty
\n
\n
\n
\n
Required for operation: 200lbs stones (Qty 5 x 44lbs of 5-10cm stones)
\n
Specifications
\n
| Model | Cilindro PC80 |
|---|---|
| Kilowatt Rating (KW) | 8 KW |
| Primary Fuel | Electric |
| Minimum Adjusted Cubic Feet | 141 |
| Maximum Adjusted Cubic Feet | 431 |
| Voltage | 240 |
| Phase | 1 |
| Nominal Amps | 33.4 Amps |
| Heater Weight | 37.5 lbs |
| Shipping Weight with Sauna Stones | 257.5 lbs |
| Width In Inches | 14″ (355mm) |
| Depth In Inches | 13″ (330mm) |
| Height In Inches | 40″ (1016mm) |
\n
\n
Useful Links
\n
Reviews
There are no reviews yet.